Morton Salt Box Project

From Our Friends at Morton Salt!
A Special thanks to everyone over at Morton for letting us use these images for radios!!
 

Left: 1914 Morton Salt Box Reproduction
Right: 1921 Morton Salt Box Reproduction
 

---

1914 Morton Salt Box Images

Click on the two images above to down load for printing.
The right image must be 5" high x 5.5" wide, and the left image should be 5" high x 6" wide.
This will fit a "new" Morton's salt box exactly (don't forget to remove and use the salt!!)
I cut out the images and sprayed them with a contact adhesive from a spray can and then applied
them to the new Morton's salt box.
 

---

1921 Morton Salt Box Images
 

Click on the two images above to down load for printing.
 

---

    Two beautiful "salt box" radios build by Dan Peterson May 2003
 

---

Build a salt box and then wind your coil over it and it will look just like a "old" set!! Need plans for the radio? One set of plans at the bottom of this page or Go to The Xtal Set Society http://www.midnightscience.com/project.html Check out The Xtal Set Society's main web page at http://www.midnightscience.com/

 

Oat Box Crystal Radio Set Plans
Page 1

Page 2
 
 
 

Another set

 
 
All Images Are Used With Permission Of Morton Salt and are the property of Morton International, INC.

---